9W Slim LED Recessed Downlight | 810 Lumens with Selectable CCT
Save $-24.73
In stock
Ask An ExpertSubtotal: $24.73
Fast Delivery: USPS Priority Mail
- Flat Rate Shipping
- Secure Checkout — SSL Encrypted
| Power | 9W LED |
|---|---|
| Output | 810 lumens |
| Beam angle | 110 degrees |
| Colour temperature | Adjustable on the fixture |
| Profile | Slim body for shallow ceilings |
| Mounting | Recessed |
| Light source | SMD LED, integrated |
- Measure the void depth first - the slim body is the reason to choose this. Lift a tile, look through an existing opening, or check from the floor above.
- Check the output suits the room - at 810 lumens this is for small spaces. For a kitchen or living room, step up to 12W.
- Plan tighter spacing - the 110 degree beam is narrower than a wide angle fixture, so reduce the usual spacing by about a foot.
- Cut the openings - mark the grid before cutting.
- Set the colour temperature - adjust on the fixture, same setting throughout the room.
- Connect and seat - a licensed electrician makes the connections, then push each fixture in until the clips hold it flush.
The smallest fixture that still lights a room
At 9W and 810 lumens this is the entry point of the range. It is not trying to be the main light in a living room. It is the right answer for the places where a bigger fixture would be too much: a small bathroom, a walk-in wardrobe, a landing, a run of accent lights along a corridor.
The slim body matters as much as the output. Where a full-depth housing will not fit above the ceiling, this one usually will.
Specification
| Power | 9W LED |
| Output | 810 lumens |
| Beam angle | 110 degrees |
| Colour temperature | Adjustable on the fixture |
| Profile | Slim body for shallow ceilings |
| Mounting | Recessed |
| Light source | SMD LED, integrated |
How many for a small room
| Room | Typical size | Fixtures |
|---|---|---|
| Small bathroom | 6 x 8 ft | 2 – 3 |
| Walk-in wardrobe | 6 x 6 ft | 2 |
| Landing | 6 x 10 ft | 2 – 3 |
| Corridor | 3 ft wide | One every 3 – 4 ft |
| Utility room | 8 x 8 ft | 3 – 4 |
When to step up instead
If the room is a kitchen, a living room or anywhere people read or work, go to 12W. Using six 9W fixtures where three 12W would do costs more, cuts more holes, and still leaves the room feeling dim.
Measure the void before you order
The slim body is the reason to choose this, so confirm it fits. Lift a ceiling tile, look through an existing opening, or check from the floor above. Guessing here is what turns a short job into a long one.
Colour temperature
Adjustable at the fixture. Warmer for a landing or a wardrobe, neutral for a bathroom or a utility room. Keep every fixture in one room on the same setting.
Installation
Hardwired and recessed, fitted by a licensed electrician. Check void depth and insulation clearance before cutting.
Related
For more output in the same slim body see our 12W slim downlight. Where nothing fits in the ceiling at all, see surface mount fixtures.
