12W Adjustable Gimbal Downlight | 36 Degree Tilt Recessed Accent Light
Save $-24.38
In stock
Ask An ExpertSubtotal: $24.38
Fast Delivery: USPS Priority Mail
- Flat Rate Shipping
- Secure Checkout — SSL Encrypted
Frequently Bought Together
Total: $66.79
| Power | 12W LED |
|---|---|
| Colour temperature | Adjustable on the fixture |
| Mounting | Wall |
| Use | Medium and large indoor spaces |
- Set the mounting height for the job - 60 to 66 inches in a corridor, 48 to 52 inches beside a bed, 60 inches above each tread on a staircase.
- Space a corridor run 8 to 10 feet apart - wider and you get dark stretches between pools of light.
- Consider it instead of a nightstand lamp - two wall lights free up both nightstands and put the switch within reach.
- Set the colour temperature before mounting - warmer for bedrooms and hotel corridors, neutral for stairwells, cooler for service areas.
- Keep every fixture in one run on the same setting - mixed settings in a corridor read as a fault.
- Hardwire and wall mount by a licensed electrician.
An adjustable gimbal downlight, not a sconce
This is a recessed gimbal downlight. It sets into the ceiling, and the inner head tilts and turns so the 12W beam can be aimed after the fixture is in. The 36 degree spread is tight enough to wash a wall, light a piece of art, or pick out joinery and features rather than flood the whole room.
The colour temperature is set on the fixture, and the IP54 rating lets it go into a bathroom ceiling or a covered outdoor soffit as well as a living space.
Specification
| Power | 12W |
| Output | 1000 lumens |
| Beam angle | 36 degrees |
| Head | Adjustable gimbal, tilt and turn |
| Colour temperature | 3000K / 4000K / 5000K, set on the fixture |
| CRI | >80 |
| Rating | IP54 |
| Mounting | Recessed |
What it is for
- Washing light down a wall or across a textured surface
- Lighting art, shelving and feature joinery
- Angled accent light in living rooms, hallways and retail
Aim it after it is fitted
The gimbal head is the point of this fixture. Set the recessed can, then tilt and turn the head to land the beam exactly where it is wanted. Keep every head in a run angled the same way so the line reads as deliberate.
Installation
Recessed into a ceiling opening and hardwired by a licensed electrician. Set the colour temperature before fitting, and keep one setting across the run.
