9W LED Recessed Downlight | 810 Lumens, Wide 120 Degree Beam
Save $-18.03
In stock
Ask An ExpertSubtotal: $18.03
Fast Delivery: USPS Priority Mail
- Flat Rate Shipping
- Secure Checkout — SSL Encrypted
Frequently Bought Together
Total: $90.05
| Power | 9W LED |
|---|---|
| Output | 810 lumens |
| Colour temperature | Adjustable on the fixture |
| Mounting | Wall |
- Pick the size for the space - 7W for narrow hallways and bedsides, 9W for standard hallways, stairwells and living rooms, 12W for wide corridors and feature walls.
- Use one size per run - a hallway with a 7W at one end and a 9W at the other reads as a fault.
- Set the mounting height - 60 to 66 inches in a hallway or living room, 60 inches above each tread on a staircase, 48 to 52 inches beside a bed.
- Space them 7 to 9 feet apart.
- Set the colour temperature before mounting - warmer in bedrooms and hospitality, neutral in stairwells and commercial hallways.
- Keep every light in one run on the same setting.
A wide beam recessed downlight
This is a recessed LED downlight with a wide 120 degree beam, built for general light across a room rather than a tight accent. At 810 lumens from 9W it covers a good area from a single point, so fewer fixtures light an average room evenly.
The colour temperature is set on the fixture across 3000K, 4000K and 5000K, and the IP54 rating lets it go into a bathroom ceiling as well as a living space.
Specification
| Power | 9W |
| Output | 810 lumens |
| Beam angle | 120 degrees |
| Colour temperature | 3000K / 4000K / 5000K, set on the fixture |
| CRI | >80 |
| Rating | IP54 |
| Mounting | Recessed |
Where it suits
- General ceiling light in hallways, stairwells and living rooms
- Even coverage over an open area from spaced points
- Damp areas such as bathrooms, under the IP54 rating
Spacing for even light
Plan the spacing from the ceiling height and the wide beam so the floor is lit evenly without dark gaps. Keep every fixture in a room on one colour setting so the light reads as one.
Installation
Recessed into a ceiling opening and hardwired by a licensed electrician. Set the colour temperature before fitting.
