7W Adjustable Gimbal Downlight | 36 Degree Tilt Recessed Accent Light
Save $-24.38
In stock
Ask An ExpertSubtotal: $24.38
Fast Delivery: USPS Priority Mail
- Flat Rate Shipping
- Secure Checkout — SSL Encrypted
Frequently Bought Together
Total: $66.79
| Power | 7W LED |
|---|---|
| Colour temperature | Adjustable on the fixture |
| Mounting | Wall |
| Use | Home and commercial |
- Pick 7W or 12W by the space - 7W for narrow hallways, landings and bedsides, 12W for wide corridors and feature walls.
- Use more fixtures at lower output - two 7W lights in a hallway give a more even result than one 12W in the middle. Spacing matters more than wattage in a corridor.
- Set the mounting height - 60 to 66 inches in a hallway, 48 to 52 inches beside a bed, 60 inches above each tread on a staircase.
- Space them 6 to 8 feet apart in a hallway.
- Set the colour temperature before mounting - warmer for bedrooms and hallways, neutral for stairwells and commercial corridors.
- Keep every fixture in one run on the same setting.
An adjustable gimbal downlight, not a sconce
This is a recessed gimbal downlight. It sets into the ceiling, and the inner head tilts and turns so the 7W beam can be aimed after the fixture is in. The 36 degree spread is tight enough to wash a wall, light a piece of art, or pick out joinery and features rather than flood the whole room.
The colour temperature is set on the fixture, and the IP54 rating lets it go into a bathroom ceiling or a covered outdoor soffit as well as a living space.
Specification
| Power | 7W |
| Output | 500 lumens |
| Beam angle | 36 degrees |
| Head | Adjustable gimbal, tilt and turn |
| Colour temperature | 3000K / 4000K / 5000K, set on the fixture |
| CRI | >80 |
| Rating | IP54 |
| Mounting | Recessed |
What it is for
- Washing light down a wall or across a textured surface
- Lighting art, shelving and feature joinery
- Angled accent light in living rooms, hallways and retail
Aim it after it is fitted
The gimbal head is the point of this fixture. Set the recessed can, then tilt and turn the head to land the beam exactly where it is wanted. Keep every head in a run angled the same way so the line reads as deliberate.
Installation
Recessed into a ceiling opening and hardwired by a licensed electrician. Set the colour temperature before fitting, and keep one setting across the run.
