Commercial LED Downlight | Selectable Wattage in 6, 8 and 10 Inch
Save $-126.00
Out of stock
Ask An ExpertSubtotal: $126.00
Fast Delivery: USPS Priority Mail
- Flat Rate Shipping
- Secure Checkout — SSL Encrypted
| Selectable wattage | 36W, 27W or 18W |
|---|---|
| Colour temperature | Tunable on the fixture |
| Voltage | 120 to 347V |
| Cut-out size | 8 inch |
| Supply | 4 per carton, 144 per pallet |
- Pick the size for the space - 6 inch for corridors and back of house, 8 inch for offices, retail and meeting rooms, 10 inch for lobbies and high ceilings.
- Use one size across a floor plate - mixing sizes in one open space reads as a mistake even when the light levels are right. Change the wattage setting instead.
- Check the supply voltage - the 120 to 347V range covers Canadian commercial supplies where 347V is standard.
- Space them 7 to 9 feet apart - and keep the grid square to the room.
- Set the wattage before the fixtures are seated - the selector is on the fixture.
- Order by the pallet above about eighty fixtures - 144 per pallet usually lands cheaper and arrives in one delivery.
- Confirm the circuit load for the full run before the first fixture goes in.
One commercial downlight, three cut-out sizes
Commercial downlights are bought by the carton, not the fitting. This is one fixture family in three cut-out sizes — 6 inch, 8 inch and 10 inch — so a whole building can run on a single part number per ceiling. Choose the size on this page; each size carries a selectable wattage set on the fixture once the layout is final.
Choosing the size
| Size | Selectable wattage | Typical use | Spacing |
|---|---|---|---|
| 6 inch | 27W, 19W or 13W | Corridors, small offices, back of house | 6 – 8 ft |
| 8 inch | 36W, 27W or 18W | Offices, retail, meeting rooms | 7 – 9 ft |
| 10 inch | 40W, 30W or 20W | Lobbies, reception, high ceilings | 6 – 8 ft |
Specification
| Cut-out size | 6, 8 or 10 inch (select above) |
| Wattage | Selectable on the fixture |
| Colour temperature | Tunable on the fixture |
| Voltage | 120 to 347V |
| Supply | By the carton and pallet |
| Light source | SMD LED, integrated |
| Mounting | Recessed, hardwired |
Why 347V matters
Most domestic fixtures stop at 277V. The 120 to 347V input covers Canadian commercial installations, where 347V is standard in offices and retail. If the project is north of the border, this line rules the fixture in or out.
Standardise a floor plate
Because the wattage is selectable, a whole storey can run on one size. Corridors and back of house on the low setting, offices on the middle, lobbies and reception on the high. One line on the order, one spare stock item, and no chance of the wrong box reaching the wrong room.
Set the wattage before the ceiling closes
The selector is on the fixture. Once the grid is in and the fixtures are seated, changing the setting means pulling each one back out. Commission as you install.
Ordering by volume
Supplied by the carton and the pallet, priced for a project rather than a single fitting. Send us the fixture count and the sizes and we will quote cartons against a pallet either way.
Installation
Hardwired and recessed, fitted by a licensed electrician. Confirm the ceiling void depth, insulation clearance and the circuit load for the full run before the first fixture goes in.
Related
For high ceilings above 15 feet, see our high bays. For a full scheme, browse commercial ceiling lights.
Related Products
-
-
Sold out Quick view
-
Sold out Quick view
-
Sold out Quick view
-
Sold out Quick view
