Narrow Beam LED Downlight | 6W to 12W Accent Lighting at 24 and 36 Degrees
Save $-21.10
In stock
Ask An ExpertSubtotal: $21.10
Fast Delivery: USPS Priority Mail
- Flat Rate Shipping
- Secure Checkout — SSL Encrypted
| Wattage | 6W to 12W depending on version |
|---|---|
| Beam angle | 24 or 36 degrees, adjustable on some versions |
| Colour temperature | Selectable on the fixture |
| Mounting | Recessed |
- Position by the object, not the grid - narrow beam fixtures are the one type that should break a regular ceiling layout. A perfectly spaced row of accent lights that misses everything it was meant to hit is a common and expensive mistake.
- Use the 30 degree rule for artwork - set the fixture 2 to 3 feet out from the wall on an 8 foot ceiling so the beam hits the piece at about 30 degrees from vertical.
- Pick the beam by the target - 24 degrees for a single object, 36 degrees for artwork or a display shelf.
- Take an adjustable version where the display may change - a gallery wall or a seasonal retail layout.
- Plan the general lighting separately - a room lit only with narrow beams has bright pools and dark gaps between them.
- Mark positions from the objects before any hole is cut, then hardwire by a licensed electrician.
A tight cone for lighting an object
A narrow beam downlight throws 24 to 36 degrees instead of the 90 or more a general downlight gives. That tight cone lands on the thing you aimed at and leaves the surface around it alone, which is what makes an object read as lit rather than the room.
The range runs 6W to 12W, with fixed and adjustable beam versions.
Beam angle and what it does
| Angle | Pool at 8 ft | Use it for |
|---|---|---|
| 24 degrees | About 3.5 ft across | A single object, a sculpture, a sign |
| 36 degrees | About 5 ft across | Artwork, a console, a display shelf |
| 60 degrees | About 9 ft across | A seating area, a table |
| 90 degrees and up | 16 ft and more | General room lighting |
The adjustable versions switch between 24 and 36 degrees on the fixture, which is worth having when the thing being lit might move — a gallery wall, a retail display that changes with the season.
Position by the object, not the grid
Narrow beam fixtures are the one type that should break a regular ceiling grid. Put them where the thing is. A perfectly spaced row of accent lights that misses everything it was meant to hit is a common and expensive mistake.
The 30 degree rule for artwork
Set the fixture so the beam hits the piece at about 30 degrees from vertical — roughly 2 to 3 feet out from the wall on an 8 foot ceiling. Steeper and glare bounces back at whoever is looking. Shallower and the frame casts a shadow across the work.
Mix, do not substitute
Narrow beam fixtures are an accent layer. A room lit only with them has bright pools and dark gaps between. Plan the general lighting separately with wide beam downlights and use these on top.
Installation
Hardwired and recessed, fitted by a licensed electrician. Mark positions from the objects being lit before any hole is cut, and confirm the void depth and insulation clearance.
Related
For general coverage see our wide beam downlights. For aimable accent light on a rail, see track lighting.
